What Is The Closest Vpn Choice On A Mac For A Udp Protocol

UDP stands for User Datagram Protocol. Though it can be configured to run on any port, OpenVPN runs best on a UDP port, which is generally faster. ExpressVPN uses UDP by default unless it is blocked. TCP stands for Transmission Control Protocol. Jul 15, 2018 - Are you confused by VPN protocols like PPTP, OpenVPN, and L2TP? This is done by changing your IP address, encrypting your data, and making sure. L2TP is similar to PPTP in the sense that it is also a tunneling protocol. In general, L2TP/IPsec is a great choice for an average Internet user who just.

VPN.ac is a Romanian based VPN provider that began operations in 2012. Since then, BestVPN.com has been checking back with the service to monitor its progress. The Virtual Private Network (VPN) keeps improving and now has its own native client app - the system used to use a generic. Read on to find out more about the important changes at VPN.ac.

This company is based in Romania, which, thanks to the data privacy protection accorded by its High Court, is a great location for a VPN. The service includes an encrypted proxy system, which can help you get around regional restrictions. IPv4 leak detected?

WebRTC leak detected? BestVPN.com tests for IP leaks aim to examine the performance of IP address masking for both IPv4 and IPv6 addresses. Unfortunately, Virgin Media doesn't employ IPv6 addresses, so I was unable to test whether VPN.ac's service could mask that address type. I tested for IPv4 leaks employing the services of. I accessed these servers while I had an OpenVPN connection to London through the VPN.ac Coventry server.

The service passed all the tests. Price VPN.ac has one subscription package. You can buy it for different periods, with a longer duration bringing you lower prices. The monthly rate on a yearly subscription works out cheaper than if you just pay for one month. However, you have to pay for the whole year's service up front. You get a seven-day money-back guarantee with all of these subscription options.

All of these plans give you an allowance of six simultaneous connections. The company also offers a one-week trial for $2.

In that plan, you only get three simultaneous connections. In all cases, your VPN subscription also gets you access to VPN.ac's SecureProxy service. The VPN works through and app. SecureProxy is implemented as a browser extension for Chrome, Firefox, and Opera - no versions are available for Microsoft Edge or Internet Explorer. This review will focus on the capabilities of the company's VPN service.

As well as accepting credit and debit cards, the company allows customers to pay with a wide range of payment processing systems, including PayPal, UnionPay, iDeal, WebMoney, and Alipay. If you want anonymity you can pay with Bitcoin, or with gift cards. You can also pay via SEPA bank transfer. SecureProxy A bonus of the VPN.ac service is a free SecureProxy service.

The company runs in more countries for its encrypted proxy service than it does for its VPNs. SecureProxy uses the HTTPS protocol to provide encryption of connection contents and diverts connections through a mediating server. These tricks are performed to fool the regional restrictions on streaming services. The theory behind this system is that you don't need full privacy just to get around regional restrictions. However, the fact that your traffic is diverted to a proxy server means that all requests to streaming servers will be presented on your behalf by the proxy. Thus, you will appear to be in the required country to get access to video content.

The proxy server forwards on the reply from the streaming server, so that you can watch your selected show in your browser. I tested the VPN.ac VPN service with Netflix and BBC iPlayer.

I also tested the VPN.ac SecureProxy with those two media sites. Both services got me around the regional restrictions of Netflix and BBC iPlayer. Windows MacOS iOS Android Linux The main page of the VPN.ac site features a map of the world showing the company's VPN server locations. The main menu is on a menu bar on the second line of the homepage. Above this, you will see a strap with a series of shortcuts to services at the site, including access to the client area.

When you scroll down, the main menu jumps up to replace the shortcut strap and stays visible at all times. At the bottom of the page is a quick links section. The client area contains links to download files, guides, and support ticket information. Free trial No 24-hour support Live chat support Money-back Guarantee You can contact the support team by clicking on 'Support' in the client area menu, then selecting 'Open Ticket' from the drop-down menu. Alternatively, you can click on the 'Open New Ticket' button in the client area main screen. There is a 'Contact support' link in the app. This opens up a page in your default web browser to give access to the support center.

The 'Submit a ticket' button in this screen is another route through to the support ticket form. As soon as you press the Submit button in the support form, you'll receive an automated response email to confirm receipt of your question. You'll also receive an email when a member of staff replies to your question. You can see the current status of all of the inquiries you made to the support team by selecting Tickets from the support menu in the client area, or by scrolling down to the support section in the main screen of your account details. The process If you want to try the $2 one-week trial, you need to go to the FAQ page and click on a link in the explanation about a trial account. To get to the signup page for a regular subscription, you should click on one of the 'Sign up now' buttons that appear at regular intervals all over the site, or go to the Pricing page. You then click on the 'Get it now' button beneath the subscription plan that you would like to buy.

Signing Up You first need to create a user account with the service before you go through the payment processing step. Below, you can see the signup page for the one-week trial. The company only requires an email address and a location from you. You'll have to have a verifiable address to clear the requirements of the payment processing company you select later on.

However, if you want to be completely anonymous, you could set up a webmail account to deal with the VPN and pay with Bitcoin or with a store gift card. After completing the signup process, you'll receive three emails from VPN.ac. The email with the subject 'VPN activation' contains the log-in credentials that you need to get the VPN client to work. The email address that you entered in the signup page is your username for the client area. The password you set up during account creation will only work for the client area, not the VPN.

Back at the site, the completion of your payment will result in the display of an order confirmation page. Click on the client area link in this page to get to the dashboard. Download links for the VPN software are available in the quick links section of the client area. The VPN.ac Windows VPN Client You need to enter the username and password into the VPN client the first time you use it.

Make sure you leave the 'Save password' box checked so you don't have to keep referring back to the welcome email every time you want to use the VPN. The process of using the VPN is very straightforward. You pick a server location from a drop-down list and select the VPN protocol that you want to use.

You then have the option of deciding whether you want to run the connection over UDP or TCP. The difference between these two options is that TCP establishes a session, whereas UDP is a 'connectionless' methodology. UDP is preferred for interactive and streaming applications. Once you have your settings sorted out, click on the Connect button to turn the VPN on. The Advanced tab of the app includes a series of security settings. The most important of these are the kill switch and the China user flag.

The kill switch prevents applications on your computer from connecting to the internet if the VPN isn't turned on. This is an important feature if you're in a location where the discovery of your internet activities could have legal ramifications. The 'censored country' flag gives you extra protection from detection when you're in China, or another repressive country. If you minimize the app, the VPN keeps running and can be accessed through an icon in the system tray of your desktop, down in the bottom right of the screen near to the date. You don't have to bring the app back in order to control the VPN.

The controls of the system are available as pop-up menus off this icon. Click on the icon to get the control menu of VPN.ac. The Connections menu option gets you a full list of available servers. Your current live connection appears in bold typeface. To change to a different server, just click on the name of that new location. Other Platforms The VPN.ac app is available for Windows, Mac OS X, iOS, and Android devices.

The VPN.ac website includes instructions to set up the service on routers running DD-WRT, Tomato, pfSense, and AsusWRT. The VPN can also be installed manually on Linux computers. Privacy and Security. Kill Switch Obfuscation (stealth) Self-hosted/Proxied DNS Yes Romania is a good location for VPN services and is home to three of the best - CyberGhost, ibVPN, and VPN.ac. The country's High Court threw out the government's data retention laws. Those laws were enacted under the compulsion of an EU directive.

The result is that Romania does not impose the data retention and disclosure requirements that other EU nations impose. The operational requirements of a VPN necessitate a mapping between a customer's IP address and the substitute address that the VPN server allocates to that customer for the session. Therefore all VPNs have to keep records of a user's activities during a session.

The key point to look out for when choosing a VPN is whether the company keeps that information on file once the session disconnects. VPN.ac doesn't keep any activity logs. However, the company does keep connection logs for the purpose of monitoring for malicious activities. Encryption Protocols. PPTP L2TP/IPsec SSTP IKEv2 OpenVPN Other protocols proxy over HTTPS Users of the custom app for Windows, Mac OS X, and Android can select a preferred VPN protocol from within the interface. This gives a choice of OpenVPN, PPTP, and L2TP with IPSec. Customers who want to use the VPN on an iOS device have to download a standard OpenVPN client that is available free of charge from the website of the organization that runs the OpenVPN protocol.

The iOS VPN.ac app has an implementation of the IKEv2 protocol. Within the app, you have a choice of security levels for the OpenVPN implementation. We recommend that you choose the 256-bit key version. This uses the Advanced Encryption Standard (AES) encryption system. You can choose to use a shorter key.

This is less secure, but it will run down your battery less if you are using the system on a smartphone. The RSA encryption with a 4096-bit key offers very strong encryption, which only the most security-conscious VPNs are offering right now. This is particularly important for those wanting a VPN in China, where the authorities are rumored to be working on cracking the session establishment encryption of VPN systems. Final Thoughts VPN.ac has improved its service since its inception and it keeps getting better. The strong performance of the server network in Europe makes this a great VPN for that continent. Speeds to the US were a little impaired by the VPN. However, if you just want to get around the regional restrictions on US streaming services, the SecureProxy browser extension could get you into your chosen site without slowing down connections.

Romania has three great VPNs: CyberGhost, ibVPN, and VPN.ac. Although I would put this VPN in third place right now, the continual improvements in VPN.ac's service mean that this company is on its way to the number one slot. Douglas Crawford replied to New vpn.ac patron on November 7, 2017 Hi New vpn.ac patron, It may be possible to look at VPN.ac's.ovpn OpenVPN configuration files.

These are often stored in the custom client's folder, or can be downloaded for manual setup. Look for DHE-4096 (any DHE or ECDH entry indicates that PFS is being used) in the line that lists control channel ciphers. Problem is, though, that this configuration can also be specified server-side, and so won't always show up client-side, even when implemented. At the end of the day, using a VPN requires a fair amount of trust in your chosen provider. If you don't trust VPN.ac to do what it promises to do, then maybe you should consider switching to a provider you do trust. FWIW, to the best of my knowledge, VPN.ac is a reputable VPN service.

Add Flash Storage To Mac For Bootcamp

Ever since I wrote about earlier this year, I’ve received tons of questions about installing Windows 10 on an external drive using Boot Camp drivers. The truth is, this is a workaround using Windows To Go, and the process for doing so is a bit more in-depth than it is for installing proper Boot Camp on your Mac’s internal disk, but it’s still very easy to do, and only takes about 30-40 minutes. In this hands-on step-by-step walkthrough, we show you how to install Windows 10 on your Mac using an external drive. Watch our video inside to see how. Note: Before you do anything, back up your Mac just to be safe. Stuff you’ll need.

Edit: Solved! Thanks to everyone who offered advice. I have a 2014 MPBr with 500GB storage. I have about 120GB left. A few weeks ago, I Windows 10 using bootcamp to play a few PC-only games (I always said I would never do it, but I finally gave in). May 23, 2016 - Run Boot Camp Assistant to put the Windows drivers onto a separate. Plug the drive into your Mac and restart holding down the Option key. No flash drives, virtual machines, Windows kits (AIK or ADK), or any other.

An eligible Mac. An external drive (preferably an SSD ). Macs that support Windows 10 For more details, visit. MacBook Pro (2012 and later). MacBook Air (2012 and later).

MacBook (2015 and later). iMac (2012 and later). Mac mini (2012 and later). Mac mini Server (Late 2012). Mac Pro (Late 2013) Video walkthrough for more video tutorials Download necessary files and save to desktop Step 01: Venture over to Microsoft’s page to download Windows 10. For Edition, choose Windows 10 under the Windows 10 Anniversary Update heading, and click Confirm.

Next, select the desired language, and click Confirm. Finally, click the 64-bit Download button to commence the Windows 10 ISO download.

Step 02: Download and save to desktop. Step 03: Download the latest version of from Hasleo Software and save to desktop. This is a Windows executable that will be used later in the VM environment. Open Boot Camp Assistant on macOS Step 04: Open Finder and go to Applications → Utilities → Boot Camp Assistant. In the menu bar, click Action → Download Windows Support Software. Choose Desktop for download location and click Save.

Step 05: Once the download process is completed, you will be asked to enter your administrator password to complete the process. Once Boot Camp Assistant reports that the Windows support software has been saved, and the WindowsSupport folder is on the desktop, close Boot Camp Assistant. Connect and format the external drive Step 06: Connect the external drive that you wish to use for Windows on your Mac. Keep in mind that everything on the external drive will be erased, so ensure that anything you wish to save is backed up before proceeding. Step 07: Open Finder and go to Applications → Utilities → Disk Utility. Step 08: Select the external drive under the External list on the left-hand side.

Be sure to select the correct drive! Click the Erase button, and use the following settings:.

Name: Boot Camp. Format: Mac OS Extended (Journaled). Scheme: GUID Partition Map Click Erase to confirm.

The disk will be erased and formatted, which will prepare it to be used in later steps. Close Disk Utility. Install and run VMWare Fusion Step 09: Install and run VMWare Fusion. VMWare allows for a 30-day trial period. Step 10: On the Select the Installation Method page, select Install from disc or image and click Continue. Step 11: Drag the Windows 10 ISO image from the desktop to the Create a New Virtual Machine page and click Continue. Step 12: On the Microsoft Windows Easy Install page, select Windows 10 Pro in the drop down box at the bottom of the page and click Continue.

Step 13: Click Continue Without Key when asked about a Windows Product Key. Step 14: On the Integration page choose More Isolated and click Continue. Step 15: On the Summary page, click Finish and click Save to save the virtual machine instance.

This will commence the Windows 10 installation. Installing the Windows 10 Virtual Machine One of the benefits of using VMWare is that the Windows installation is fully automated.

Windows should automatically begin the installation process, and will reboot a couple of times during the installation. Once the installation is completed, you should be at the Windows desktop. Connect the external drive to the Virtual Machine Step 16: Eject the external drive via the macOS Finder and unplug and replug the drive’s connector cable to your Mac. Step 17: VMWare Fusion should prompt about the drive once it’s detected. Select Connect to Windows.

Step 18: Right click on the Windows Start Menu and select Disk Management. Step 19: Find your disk, which should be broken up into two partitions.

Right click on the large primary partition, and select Delete Volume → Yes. Step 20: Right click on the drive’s Unallocated space and select New Simple Volume.

Step 21: On the Welcome to New Simple Volume Wizard, click Next → Next → Next and in the Volume Label box, type Boot Camp and ensure File System is set to NTFS. Click Next → Finish. Step 22: Close the Disk Management utility. Install Windows on the external drive using WinToUSB Step 23: Mount the Windows 10 ISO by clicking Virtual Machine in the menu bar and selecting CD/DVD (SATA) → Choose Disk or Disc Image. Select the Windows 10 ISO on the Desktop and click Open. Now click Virtual Machine in the menu bar again and select CD/DVD (SATA) → Connect CD/DVD to mount the Windows 10 ISO. Step 24: Drag the WinToUSB installer and the WindowsSupport folder from the macOS desktop to the virtual machine Windows desktop.

Step 25: Install and run WinToUSB. Step 26: On the WinToUSB interface select the CD Drive and select the Windows 10 ISO image (CCSAX64FREEN-US-DV5) in the CD/DVD drop-down menu. Step 27: Select Windows 10 Pro and click Next. Step 28: For destination disk select your external drive from the drop-down menu and click Next. Step 29: For EFI system partition, select the 200MB EFI partition radio button. For boot partition select the larger Boot Camp partition. Click Next and the installation will begin.

Be patient, as it will take several minutes to complete the Windows installation on the external drive. Step 30: After the installation is complete, click Home and close the WinToUSB window. Step 31: Open the Boot Camp drive in Windows Explorer, and drag the WindowsSupport folder from the Windows desktop to the Boot Camp drive.

Step 32: Shut down the virtual machine instance, and quit VMWare Fusion. Boot into Windows from external Boot Camp drive Step 33: Open System Preferences → Startup Disk. Step 34: Click the Lock in the bottom left-hand corner, and enter your Mac’s administrator password. Step 35: Select the Boot Camp Windows option, and click the Restart button to reboot the Mac and boot into Windows Boot Camp. Step 36: Upon reboot, you should see the Windows logo and initial setup sequences.

You’ll need to go back through the initial setup again like we did when setting up the virtual machine. However, this time you’ll need to interact with the installation for submitting things like username, password, etc.

Step 37: After setup is complete, you should see the Windows 10 desktop. Open the Boot Camp drive in Windows Explorer and open the WindowsSupport folder. Open the BootCamp folder and run the Setup app to install the Boot Camp drivers. The installation process may take a few minutes, so be patient. Step 38: Once all of the drivers are installed, click the Finish button to restart your Mac back into Windows. Note: Depending on your machine’s , you may need to adjust the custom scaling by right-clicking the desktop and selecting Display Settings. For the 5K iMac at native resolution I set custom scaling to 300%.

Your scaling preference may differ depending on the type of Mac you’re using. Once you Apply the scaling changes, you’ll need to sign out and sign back in for the changes to take effect. Restarting back into macOS Whenever you wish to restart in macOS, click the Boot Camp shortcut in the System Tray and select Restart in macOS. You can also hold the Option (⌥) key when restarting your Mac to be presented with a selection of boot options. There you can choose between your Boot Camp installation and macOS installation. Conclusion That may seem like a lot of steps, but the most difficult thing about this installation is the waiting period required by the Windows installs.

All in all, you should be able to complete this installation in around 30-40 minutes or so. Installing Windows on an external drive a is a good choice because it allows you to keep Windows and macOS on completely separate drives, thus it saves precious internal space on your main internal drive. Although I use Windows occasionally, I don’t use it enough to require a permanent installation on my internal macOS drive. Hence, using an external drive for Windows Boot Camp is the perfect solution for me. That acknowledged, some of you may still wish to install Windows on your Mac via Boot Camp using the traditional method.

If so, we have a hands-on video walkthrough that guides you through step-by-step.

I love my Mac and use it for work, so to separate work from play, I installed Xp on my Mac. It runs beautifully, but when I made the decision to set it up, I only allocated 20 gigs to Xp. The bootcamp drivers take up 3 of the 5 gigs of my Xp install, and 15%, or 3.20 gigs have to be available for defragmenting Xp.

So after installing 2 games, I have no space left to add any more. I still have over 100 gigs free on my Mac side.

Can I simply add more space to Xp without reformatting it, or is this impossible to do? Apple Footer. This site contains user submitted content, comments and opinions and is for informational purposes only. Apple may provide or recommend responses as a possible solution based on the information provided; every issue may involve several factors not detailed in the conversations captured in an electronic forum and Apple can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums.

Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the.

Visual Studio Codinion For Mac

10 best productivity power tools alternatives for Windows, Mac, Linux, iPhone, Android and more. Productivity Power Tools. Productivity Power Tools alternative list source: marketplace.visualstudio.com.

GoCodeEditor is a Sublime Text like remote Code Editor optimized for fast opening and editing files on your iOS Device.FEATURES: - Sublime like Code-Editor!- Extra keybar with swipe functions- Syntax highlighting focused on Web-Development (html, css, javascript, php, ruby, python, go, coffeescript, xml, markdown, lua, java, c, c. TpSort Score 28,400,000 2. TweakStyle is an Integrated Development Environment for Web Development.Unlike most IDEs, TweakStyle is tailor-made for Front-end Development and understands Web Design.It tends to packs all you need to code, preview and debug web pages with the perfect blend of features.TweakStyle may be downloaded and evaluated for free, however a license. TpSort Score 28,500,000 3.

Squad is a collaborative web-based code editor with one goal: to make it easy to open, edit, and share code in real time. Our powerful, secure tools include syntax highlighting, cloud hosting, a searchable chat log, and multiple syntaxes. We're great for PHP, CSS, JavaScript, Python, and other languages,.

TpSort Score 3,270,000 4. Xamarin provides all the tools to build native cross-platform apps in one package. Write your app entirely in C# and share your code on iOS, Android, Windows and Mac. Our installer downloads and configures Xamarin Studio, Visual Studio support, Android and iOS SDKs, and the.NET runtime. TpSort Score 1,700,000 5. Devart T4 Editor is a powerful Visual Studio add-in for editing T4 templates with syntax highlighting, intellisense, code outlining, and all features of a first-class text editor add-in for Visual Studio.

It provides very high performance and makes creating T4 templates easier and faster. As well as ensuring extremely high. TpSort Score 398,000 6. Medley Text is a note taking tool for programmers. It helps developers to collect important code snippets, ideas, in one convenient place. TpSort Score 56,700,000 7.

Review Assistant is a code review plugin for Visual Studio. The code review tool allows creating review requests and responding to them without leaving Visual Studio.

Review Assistant supports TFS, Subversion, Git, Mercurial, and Perforce. Key features: - Code Review in Visual Studio.

Review Assistant provides creating review comments directly. TpSort Score 3,620,000 8. At DevSKiller we make assessing programmers skills look like their 1st day at work, that’s the best way to recruit them. By using our online platform it’s easy to build custom exams from your own code base.

With DevSKiller you are not limited to testing knowledge of programming languages, but. TpSort Score 179,000,000 9.

Myrtille is a simple way to connect remote desktops from a web browser.As a web UI, it’s device and OS independant. Server side, it uses the.NET (C#) framework and the RDP protocol through an HTTP gateway.It supports HTML4 and HTML5, file transfer and WebP compression. TpSort Score 28,500,000 10.

This is the editor you were looking for. Keypress is an offline, desktop based code editor. Use Keypress to edit your local files, on any platform. Keypress features a stylish and interface, and intuitive features like project and fuzzy search for opening files.

It also supports versatile layouts. TpSort Score 50,500,000 11. DNN Software provides a suite of solutions that make designing, building and managing feature-rich sites and communities fast, easy and cost-effective. DNN Evoq Content is used by thousands of businesses worldwide, including a number of Fortune 500 companies. DNN was also the 2014 Critics' Choice Award Winner for Best Small. TpSort Score 851,000 12.

IncrediBits.io is a subscription free social media platform that is designed to allow communities of online users to share the progress of their projects, primarily aimed at DIY electronics beginners/enthusiasts, makers, hardware hackers and programmers.We're here to offer a simple and straightforward place for you to write about any projects. TpSort Score 61,400 13. XTRAN is our expert system for the manipulation of computer languages, data, and text. It marries compiler and expert system technologies to provide, via its rules language, automation of:.

Code assessment / analysis. Code transformation / re-engineering, including modernization. Code translation.

Code standardization. Code. TpSort Score 1,820,000 14. SOLE 64 is a starting point for those wanting to learn programming. Boot it up and it's ready to go.

The purpose of SOLE 64 is to help you learn the basics of computer programming through examples, experimentation and creation of your own programs. TpSort Score 59,600,000 15. The C IDE for professional developers. TpSort Score 247,000,000.

Visual Studio for Mac is our full-featured IDE for macOS, providing all the tools you need to create ASP.NET Core application, Unity games, Xamarin mobile apps, Azure Functions and so much more. In this video, shows how to download and install Visual Studio for Mac.

Useful links:. Episodes in this series:.

(available 1/15/2019). (available 1/15/2019). (available 1/22/2019). (available 1/22/2019). (available 1/29/2019). (available 1/29/2019).

(available 2/5/2019). (available 2/5/2019). (available 2/12/2019). (available 2/12/2019). (available 2/19/2019). (available 2/19/2019).

Format My Passport Essential For Mac

Jan 21, 2019 - WD My Passport Essential reformat on a MAC repair tool fix to do data recovery, best software help you recover MS word,excel, pictures, music,.

Summary In this article, we will analyze how a WD My Passport external drive could be brought back to life after it fails to mount on Mac. Yes, is also taken care of in this blog. Popular Uses of WD My Passport WD external hard drive such as My Passport are suitable and trusted devices serving as the best backup tools for Mac internal drive’s data. Mounting a WD My Passport!

A stable WD My Passport is readily available on the Desktop, Finder, and Disk Utility when the drive gets plugged into Mac’s USB port. Further, transfer of files to-and-from the WD My Passport is made possible when the drive is successfully mounted on the Mac computer.

After the job is done, the WD is safely removed from the Mac. How and Why WD My Passport is Not Recognized on Mac? There are several possibilities for a WD My Passport hard drive going invisible on a Mac system. Those possibilities could range from:.

WD’s corrupt partition table. WD’s damaged file system. Disk errors on WD.

Hard drive faulty cable. Wear and tear on WD. Failed Restore on WD. Failed Partitioning on WD My Passport. Bad blocks. Lastly, damage to a WD device Identifying an WD My Passport?

You can try below actions to determine if the WD My Passport external hard drive is mounting on your Mac: 1. Connect the WD My Passport to your system, 2. Wait for the drive to appear in the Finder and Desktop.

Note: If the WD gives no response after getting connected with the Mac then go to Finder. I have MacOS High Sierra 10.13.6, and I accidentally my external USB drive without eject it properly. After that I had the same issue.

It shown up in Disk Utility but greyed out after connected it back. Could not eject it, could not remount, virtually could not do any thing.

I tried all the solutions posted currently, none worked. Rebooted my Mac and tried connect the drive again, no helps. It was still greyed out in Disk Utility and finally, on Disk Utility, I right click on the greed out External, and selected image from, hit the cancel button on the popup, and all the sudden, it became alive.

Not sure what is going on here, but I did not have to erase the drive. Hi there, I’m trying to use a brand new WD drive for my mac, which is running High Sierra 10.13.3, and I’m realizing I bought the drive formatted for Windows. I’m having a very hard time trying to get this drive reformatted for Mac. I’ve been searching forums but to no avail. When in Disk Utility, on the left, this drive is now called “disk3s1”. At the top of Disk Utility, underneath this title it says: “USB External Physical Volume – MS-DOS (FAT)”. I am to get this drive converted for a mac now.

Erasing, Partitioning, First Aid, Mount have all run into errors. Do you have a simple step by step of how to fix this? Like I said, I haven’t even used this drive yet and I’m running into problems already. 🙁 Thank you in advance for any help.

Hello all, Today I bought the 4tb “My Passport” from Best Buy. I came home to set it up and backup my computer (a 2015 MacBook Pro running El Capitan 10.11.6) Before I did anything to it, I read through the user’s guide and saw that I needed to format it to use with my MacBook. So, I followed the steps- I went into Disk Utility, selected “My Passport,” clicked “erase,” selected “OS X Extended (Journaled)” as the format, and clicked “erase” once again. After working for a moment, it told me that the operation had failed because “MediaKit reports not enough space on drive”.

I FIND ALL THIS LAUGHABLE. I signed in here just to vent about exactly this. Every time I buy a hard drive it’s a gong show.

So, my seagate falls off my table tonight- toast. I buy this my passport -seems tougher. Of course -Cant get it to format. I am tempted to just click the ‘my passport’ instead of the subheading but oh no, i spend an hour in safe mode following this: I found it extremely amusing that when I open this forum the first topic at the top is exactly this WHY WHY does it have to be this way - mis honkin leading instructions every timeI will improve the conversation by saying thx to Donald for helping Dean and Dean, you aren’t the only one ps I knew i was in trouble right off the bat when I googled the WD website and within a paragraph there the red ink telling me about the possible error and trouble. I am totally pissed. I purchase this wd passport 2 tb and I feel like smashing it against a wall.

I simply wanted a normal external hd that I could attach to my computer and use it. Couldn’t do anything. I don’t need all this ■■■■ security or backup.

I tried reformating it but wouldn’t let me. Couldn’t eject it, had to unplug the usb but it was still on my computer and it refused to eject. Locked my computer and had to restart. Wouldn’t even mount anymore. Piece of ■■■■.

Returning tomorrow. How do people give this thing such good reviews beats me.

Best Video Effect Software For Mac

Michael Muchmore The Best Video Editing Software for 2019 Whether you're a weekend GoPro shooter or a full-time video professional, you need editing software that's powerful but easy to use. Here's how the best video editing software stacks up. Edit Video on Your PC Nothing makes an impression like moving images with sound. That's why digital video continues to grow in importance online. Couple that trend with the ever-increasing availability of devices capable of high-resolution video recording—s, GoPros, DSLRs—and the case for ever more powerful video editing software becomes clear. Further, the software must be usable by nonprofessionals, and it has to keep up with new formats such as HEVC (High Efficiency Video Coding), 360-degree VR video, and 4K and above. Increasingly, new capabilities trickle down from professional-level software to the consumer category.

That's a good thing for nonprofessional movie editors, since the more-consumer-oriented software makes formerly difficult procedures a cinch for them. Read on for a survey of the latest trends in video editing software and our top picks in the field. Multicam, Motion Tracking, and Yet More Motion Advanced abilities continue to make their way into accessible, affordable, and consumer-friendly video editing software as each new generation of software is released. For example, multicam editing, which lets you switch among camera angles of the same scene shot with multiple video cameras, used to be a feature relegated to pro-level software. Now this and many other advanced effects are available in programs designed for use by nonprofessional enthusiasts.

Dec 22, 2018 - The best free Mac video editor 2019. Free editors don't get better than this. Apple's own movie app is easy to master and ideal for simple video editing. DaVinci Resolve. Another professional video editor that's free to install on your Mac. OpenShot Video Editor.

Another impressive effect that has made its way into consumer-level video editing software is motion tracking, which lets you attach an object or effect to something moving in your video. You might use it to put a blur over the face of someone you don't want to show up in your video.

You specify the target face, and the app takes care of the rest, tracking the face and moving the effect to follow it. This used to be the sole province of special effects software such as Adobe After Effects. Corel VideoStudio was the first of the consumer products to include motion tracking, and it still leads the pack in the depth and usability of its motion-tracking tool, though several others now include the capability. The 4K Factor Support for 4K video source content has become pretty standard in video editing software, but the support varies among the products.

For example, some but not all of the applications can import Sony XAVC and XAVC-S formats, which are used by Sony's popular DSLRs, camcorders, and professional video cameras. The same holds true for the H.265 High Efficiency Video Coding (HEVC) standard. Most of the applications here now can import and export HEVC, though there are still a few holdouts. 360-Degree VR Support. Several of the products here (Adobe Premiere Elements is a notable exception) still support 3D video editing if that's your thing, though the this has been replaced by 360-degree VR footage like that shot by the as the current home-theater fad. As is often the case, our Editors' Choice, CyberLink PowerDirector was the first product in this group to offer support for this new kind of video media.

Other programs have jumped on board with 360 VR support, including Adobe Premiere, Apple Final Cut Pro X, and Magix Movie Edit Pro. Support varies, with some apps including 360-compatible titles, stabilization, and motion tracking.

PowerDirector is notable for including those last two. Final Cut offers a useful tool that removes the camera and tripod from the image, often an issue with 360-degree footage. Video Editing 101 Of course, none of the extras matter if an app can't do the most basic editing tasks. At this point, however, all of the products included here do a good job of letting you join, trim, and split video clips. They also let you make use of special effects such as animated transitions, picture-in-picture (PiP), chroma-key (the technique that lets you place a subject against any background, often known as green screening), and filters that enhance colors or apply creative effects and distortions. With most of them you can add a multitude of timeline tracks that can accommodate video clips, effects, audio, and text overlays. LUTs and CLUTs One of the capabilities that has been making its way into consumer-level video editing software is support for LUTs (lookup tables), also known as CLUTs (color lookup tables).

This staple of pro-level software lets you quickly change the look of a video to give it a specific mood. For example, think of the dark blue look of thriller movies like The Revenant. You can download LUTs for free from several sites or use those included with some video software to give your video a specific look. One well-known LUT type is the kind that can make a daytime scene look like it was shot at night. Where the Action Is Many video editing apps now include tools that cater to users of such as the GoPro Hero7 Black. For example, several offer automated freeze-frame along with speedup, slowdown, and reverse time effects. CyberLink PowerDirector's Action Camera Center pulls together freeze frame with stabilization, slo-mo, and fish-eye correction, and color correction for underwater footage.

Magix Movie Edit Pro Premium includes the third-party NewBlue ActionCam Package of effects. And Wondershare Filmora lets you subscribe to new effect packs on an ongoing basis.

Titles That Zing. I've been seeing a lot of attention paid to creating title effects in the applications over the past year. Apple Final Cut Pro X has added 3D title creation, which is pretty spiffy, letting you extrude 2D titles and rotate them on three axes. Corel VideoStudio in its latest version also adds 3D Titling, though not as powerful as Apple's.

PowerDirector's Title Designer offers transparency, gradient color, border, blur level, and reflection in titles; Magix has impressive title templates, complete with animations. Premiere Elements offers a nifty title effect in which your video fills the text .

Look for an application that lets you edit titles in WYSIWYG (what you see is what you get) mode, so that you can type, format, and time it right over the video preview. Gathering Speed Video editing is one of the most computing-intensive activities around, so you'll want the or desktop you can afford if you're serious about cutting your own movies. Most applications help speed up the editing process by creating a proxy file of lower resolution, so that normal editing and previewing aren't slowed down by the huge full-resolution files. Particularly intensive is the process of rendering your finished product into a standard video file that will by playable on the target device of choice, be that an HDTV, a laptop, or a smartphone. Most of the software can take advantage of your computer's graphics processor to speed this up.

Be sure to check the performance section in each review linked here to see how speedy or slow the application is. In rendering speed testing, CyberLink and Pinnacle have been my perennial champs.

Other measures of performance include startup time and simple stability. Again, video editing is a taxing activity for any computer, involving many components. In the past, video editing programs took longer than most other apps to start up, and unexpected shutdowns were unfortunately common, even in top apps from top developers such as Adobe and Apple. The stability situation has greatly improved, but the complexity of the process, which increases as more powerful effects are added, means crashes will likely never be fully , and they often raise their ugly heads after a program update, as I found with the latest version of Pinnacle Studio. Free Video Editing Software If you don't want to invest a lot of money and effort into your video editing exploits, there are a few free options. Of course, if you use a Mac, the excellent iMovie comes with it.

For PC users, 's Photos app (as of the Fall Creators Update) lets you join, trim, and even add background music, 3D animated effects, and titles to video. There are also some free video apps on the Windows Store, including, PowerDirector Mobile, Movie Maker, and Magix Movie Edit Touch. Some of these are quite basic, but the Magix app is fairly capable, with clip joining, transitions, and effects, in a very touch-friendly interface. Free video editing software often comes with legal and technical limitations, however. Some widely used codecs require licensing fees on the part of the software maker, meaning they can't offer free software that can handle these standard file formats.

That said, the impressive open-source does a lot of the same things that the paid applications in this roundup do, including things like chroma-keying and picture-in-picture. Shotcut is completely open-source and free, while another free option, Lightworks has paid options that remove a 720p output resolution limit. Note also that both Shotcut and Lightworks run on Linux as well as Windows and Mac. What About Apple? Though Mac users don't have the sheer number of software choices available for PCs, Apple fans interested in editing video are well served, by four products in particular. At the entry level, the surprisingly capable and enjoyable-to-use iMovie comes free with every Mac sold since at least 2011. IMovie only offers two video tracks, but does good job with chroma-keying, and its Trailers feature makes it easy to produce slick, Hollywood-style productions.

In the midrange, there's Adobe Premiere Elements, which is cross-platform between Macs and PCs, and offers a lot more features and lots of help with creating effects. Professionals and prosumers have powerful, though pricey options in. Final Cut is a deceptively simple application that resembles iMovie in its interface and ease of use, but it offers massively deep capabilities, and many third-party apps integrate with it for even more power. It also makes excellent use of the Touch Bar on the latest MacBook Pro, as shown in photo above. Premiere Pro uses a more traditional timeline and adds a large ecosystem of companion apps and plug-ins.

It also excels in collaboration features. Audio Editing We still live in the days of talkies, so you want to be able to in your digital moves as well as the images.

Most of the products included here offer canned background music, and many, such as Pinnacle Studio, can even tailor the soundtrack to the exact length of your movie. All of these programs can separate audio and video tracks, and most can clean up background noise and add environmental audio effects such as concert hall reverb. A couple of the products have an auto-ducking feature, which lowers background music during dialog—a definite pro-level plus. What's Not Here There are more video editing software applications than we can fit into this roundup of the best options, which includes only software rated three stars and higher. The best known among them is probably, which was recently acquired by Magix from Sony. Sony's product used a very cluttered interface that more resembled high-end professional video editing software from the early days of the craft.

Magix has made some progress in simplifying it and bringing it up to par with the competition, but more work is needed for it to be included here. Another program, simply has too outdated an interface, making common tasks difficult.

Longtime pro video editors will note the absence of Avid Media Composer, which is simply too unwieldy for PCMag's primarily consumer audience. There are a couple of more interesting applications—NCH VideoPad and AVS Video Editor among them—that we simply haven't tested yet. The Finish Line The video editing application you choose depends on your budget, the equipment you're using, and how serious you are. Fortunately, you're spoiled for choice with the products available. Peruse our in-depth reviews of enthusiast-level video editing software reviews linked below to see which is the right one for you.

Pros: Clear, flexible interface. Lots of organizational tools. Responsive speed. Ultimate power in video editing. Rich ecosystem of video production apps.

Excellent stabilization. Unlimited multi-cam angles. Cons: No keyword tagging for media. Some techniques require additional applications such as After Effects or SpeedGrade. Bottom Line: An expansive professional-level digital video editing program, Premiere Pro CC has everything today's pro video editor needs, particularly when it comes to collaboration. Pros: Wide selection of fun video-creation tools.

Clear, simple interface. Support for 360-degree VR, 4K Ultra HD, and 3D media. Multipoint Motion tracking. Multicam editing. HTML5 video page creation.

Stop-motion tool. Cons: Middle-of-the-road rendering speeds. No search for effects or media. Only 20 video overlay tracks. Bottom Line: Corel continues to offer one of the most feature-packed consumer video editing packages around.

The 2018 update adds even more including 360-degree support, 3D titles, and action-cam lens correction. Pros: Clear interface. Edits 360-degree VR content.

Fast rendering performance in testing. Tons of effects. Multicam editing. 4K and H.265 support. Tagging and star ratings for media.

Good audio tools. Cons: Motion tracking issues on one test PC. Occasional crashes in testing.

Uneven 360-degree VR implementation. Bottom Line: Pinnacle Studio is a fast, full-featured, near-professional-level video-editing application with support for 360-degree VR, 3D, and multicam edits.

New color grading and four-point editing make it even more appealing, though our testing uncovered some instabilities. Pros: Lots of video effects. Good titling tools. Trailer-like movie templates.

Solid audio editing tools. Strong disc authoring.

Fast rendering. Good stability. 360-degree media support. Cons: Not much help with difficult procedures. Lacks import and organization tools. Extra costs and coded downloads for some video formats.

Bottom Line: Now with faster rendering, Movie Edit Pro offers solid stability, up-to-date support for 4K, 360-degree, and multicam editing, but it trails other video editing software in ease-of-use. Pros: Magnetic, trackless timeline.

Superior organization tools, including libraries, ratings, tagging, auto analysis for faces, scenes. Support for 360-degree footage and HDR. Multicam support. Fast performance.

MacBook Touch Bar support. Cons: Nontraditional timeline-editing may turn off longtime editors.

Can't import projects from previous versions without a third-party plug-in. No stabilization or motion tracking for 360-degree video. Bottom Line: Apple's professional-level video editing software, Final Cut Pro X, brings a wealth of power in an interface simple for pros and consumers alike. Recent highlights include rich support for 360-degree content and improved stability. Pros: Inexpensive. Plenty of video effects.

Good audio tools. Solid file format support, including H.265. Compatible with 4K content. Burns DVD, Blu-ray, and AVCHD. Cons: Light on features.

Outdated, unconventional interface. No 360 or 3D support. No motion tracking. No direct output to social networks. Bottom Line: For less money than the competition, Nero offers a wide array of enthusiast-level video editing capabilities, but the interface is dated and it trails in support for new formats and techniques. Pros: Beautifully simple interface.

Color matching for consistent movie looks. Classy themes. Great chroma-keying tool. Lots of audio tools.

Theater feature shares movies to all your Apple gear. Cons: Not as flexible as some PC video editors. In the name of simplicity, some useful controls are missing. Does not support tagging. Lacks multicam or motion tracking capabilities.

Limited to two video tracks. Bottom Line: Apple's excellent entry-level desktop video editing application can turn your footage and photos into impressive productions.

Turn any picture in to a work of digital art. Over 35 effects. Share to Facebook, Flickr and YouTube. Also you can save photos as a Video Clips with Effects.

Just drag and drop your photo and select the effect. And it's perfect for taking selfie's by using the built in camera and uploading it to Facebook, Flicker, Twitter or YouTube. You can also make short video clips too. It's the perfect companion program for iPhoto and iMovie. Or, for adding special effects to your pictures before you uploading them to the your favorite social network site.

Effects by Zugakousaku used with permission. Special thanks to Matthias Gansrigler and Futurismo Zugakousaku. Sharing with Flickr requires 10.9 or lesser.

Where To Get Help For Slow Mac?

Aug 23, 2016 - Reducing them can help speed things up — it's worth a shot. To do this, open the System Preferences window. Click the “Accessibility” icon and check the “Reduce transparency” option to reduce transparencies. On OS X Yosemite, this option can significantly speed up some older Macs. Mac Slow Startup? 7 Possible Causes and Fixes. August 27, 2018 May 3, 2018. Unused third-party apps, etc., that will help optimize your Mac startup. How to fix: clean up Mac drive. There are many manual fixes regarding this, at the price of taking your time thought. Some may require technical skills during the process.

So, is your Mac taking forever (or much longer) to startup? Studies show that when a slow startup is not only waste of time, it also affects your health.

There is nothing more frustrating than a slow MacBook Pro or iMac, when you need it to get the work done in the morning. Normally, a Mac takes 30 seconds (or less) to start up, depending on whether the machine is loaded with a hard drive or solid-state drive. But if it takes much longer (or forever) to reach the first screen, then something is definitely wrong. We've found 7 possible causes accountable for the issue, together with relevant tweaks to help you fix it. Hopefully by doing so you can speed up the boot a little bit, and spend the time getting more work done.

Note: some of the tips below are from research we did from the Internet (especially Apple communities/ forums ), we also have experience consulting geeks on Apple Genius Bar. 1. You've got too many startup items Nothing slows down a Mac more than having loads of apps and services automatically launching when you press the start button. If you can reduce the number of auto-startup items, you'll be sure to wait less time, and your Mac will perform better too. How to fix: remove unnecessary login items Login items are those applications that run automatically once you log in. To check and disable those unnecessary items, click Apple icon System Preferences Users & Groups, now click on the Login Items tab (it's right next to Password).

Then select those items you don't need to open up on startup, and click the minus '-' symbol. Meanwhile, don't forget those launch agents (aka, app services that auto run and show up on Mac menu bar). For example, AmazonMusic, Adobe CreativeCloud Helper, etc. When you install an Amazon or Adobe app, its helper services are often pre-installed too.

The worst part? They don't show up under Login Items. How to find and remove them?

One of the best ways is via (an app made by, that we often recommend for basic users). ​It has a feature that allows you to quickly identify those launch agents and disable them. See this screenshot. 2. Startup disk is getting full Lack of storage is one of the main culprits for many computer performance issues, including slow startup. When your startup disk is almost full, the entire machine will run slowly. It is a best practice that we keep the free disk space at 20% level (minimum). If you can lighten the Mac drive and delete those unnecessary files, for example, system junk, unused third-party apps, etc., that will help optimize your Mac startup.

How to fix: clean up Mac drive There are many manual fixes regarding this, at the price of taking your time thought. Some may require technical skills during the process. For instance, you can that get barely used, remove duplicates and similar files, transfer large old files (especially movies and photos) to an, clean web browser junks, and empty Trash, etc. If you are new to Mac, we also recommend using for . It's an intelligent app primarily designed to clean up Mac disk the quick way so you save time doing so manually.

You'll be amazed by the number of unnecessary files it finds. Don't be fooled by the 'Upgrade to Pro' button. The app is actually free to download and use. For cleaning, the 'Junk Files', 'Big Files', and 'Disk Map' modules are totally free without any function limitations.

Try it yourself. 3. Third-party device connections Be honest, how many peripherals you have on your Mac now? If you use your iMac or MacBook as a hub for everything, chances are it's now  by a number of things like USB hub, printer, scanner, iPhone charger, etc.

These third-party items are prone to drag down your computer performance particularly when they are not working correctly due to software issues. How to fix: disconnect unused peripherals So, it's best to connect the device only when you need it.

Also, don't forget to check relevant settings and software related to the device you use, all to make sure they are properly set up and up-to-date. 4. NVRAM issues, short for 'Non-volatile Random Access Memory', stores many pieces of information a Mac needs before it loads Apple's macOS operating system. If the values in this memory get out of order for some reasons, your Mac wouldn't start up correctly — one of the typical symptoms is your Mac takes forever to start up. Note: old Mac machines use PRAM, which is similar to NVRAM. How to fix: reset NVRAM Here's how to do it. First, shut down your Mac, press the start key (or button).

Then quickly hold these combination keys: Command + Option + P + R, right after you hear the startup sound. Then release the keys when you hear the sound for the second time. You can also watch this video for how. Tip: the video uses a MacBook Pro as an example. If you're on an iMac or Mac Mini/Pro, the process is exactly the same.

5. Macintosh disk issues Sometimes errors can hit Macintosh HD (or SSD), especially when your Mac shows its age (prior to 2012 models). If that applies to you, your Mac's hard drive may act up, and the overall system performance is taxed. In this case, it's no surprise that the startup time will be affected.

How to fix: verify and repair disk using Disk Utility Go to Finder Applications Disk Utility. If your Mac is running with OS X Yosemite or earlier, under First Aid, you'll see two buttons located at the right corner: 'Verify Disk' and 'Repair Disk.' Click the former first to check whether your Mac disk has issues, then click the later to fix it;. If your Mac is running with OS X El Capitan, macOS Sierra (or High Sierra), you won't see the two buttons, instead, just click First Aid and it will tell you whether disk repair is needed or not. 6. macOS update It is in my experience that when I perform a macOS upgrade, my Mac machine boots up a bit slower though it's not always the case. For example, it was super slow when I updated from Sierra (10.12) to High Sierra (10.13).

However, my machine was totally fine while upgrading from macOS 10.13.1 to 10.13.4. So, I guess major OS update will slow down boot time. How to f ix: Restart several times Unfortunately, it seems we don't have any working solutions here except restarting your Mac. Because slow startup is normal and expected after an installation of a major macOS version. Subsequent restarts will help bring your Mac to normal speed.​ 7. Mac hard drive is failing Every technology has its lifespan and eventually it will fail.

Hard drives are no exception. If your Mac is not only slow on startup but sluggish on almost everything.

More often than not, it's time to  to get a sense of the chances of drive , and gauge how long the disk will stand. How to fix: u pgrade to an SSD Replacing the spinning HDD with a new SSD is perhaps the best way to speed up an old Mac, and significantly improve the startup time. There are many other benefits using an SSD versus an HDD, we won't elaborate here as you can read more from we put together.

Okay, these are the 7 possible reasons and fixes for troubleshooting the Mac slow startup issue. Hopefully you've tried some of them, and have tuned up your Mac. Let us know if you have any thing to add or questions about this article, leave a comment below.

Gba Emulator For Mac With Link Cable

It is developed highly professionally and it is one of the best GBA for Android. It’s useful and most demanding features are fast forward and slow motion modes, link cable emulation, hardware support, cheat code support, and OpenGL rendering and rumble emulation.

Mac users stress no more! Introducing the most and cleanest Mac emulators section available on the net! Recommended: All-in-one emulator for Mac (Requires OS X 10.11 or higher) Arcade Atari 2600 Atari 5200 Atari 5200 Atari 7800 Atari Jaguar Atari Lynx Commodore 64 Gameboy Advance Gameboy Advance / Color Gameboy Advance / Color Multiple Systems Neo Geo CD Neo Geo Pocket Nintendo Nintendo Nintendo 64 Nintendo 64 Nintendo DS Nintendo Gamecube Sega CD / Master System / More Sega Dreamcast Sega Genesis Sega Genesis Sega Master System / Game Gear Sega Saturn Sony Playstation Sony Playstation 2 Sony Playstation Portable Spectrum ZX Super Nintendo Super Nintendo Virtual Boy Wonderswan Did you know? You can play ROMs on your Android / iOS / Windows Phone device! Visit m.coolrom.com on your mobile device now to get set up!